This article mainly introduces:

Bolivia hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

(Bolivia servo hydraulic cylinder,produced by Hengyu Group）

servo hydraulic cylinder are widely used in Bolivia，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed servo hydraulic cylinder for customers from Bolivia.

Introduction to servo hydraulic cylinder:

servo hydraulic cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the servo hydraulic cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

The servo hydraulic cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

At the rated pressure, the thrust of the servo hydraulic cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the servo hydraulic cylinder is related to the diameter of the servo hydraulic cylinder, but not to the stroke of the servo hydraulic cylinder. Moreover, the larger the servo hydraulic cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the servo hydraulic cylinder.

The advantages and disadvantages of the servo hydraulic cylinder: the surface of the servo hydraulic cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the servo hydraulic cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about servo hydraulic cylinder:

Can multiple identical hydraulic cylinders be supplied with the same supply line?
This can be connected, but there is a disadvantage, that is, the hydraulic cylinder with the minimum pressure is extended first, and then the pressure is higher, and then the higher, until all the hydraulic cylinders are extended, which may not meet the requirements of field use.

What is the HS code of the hydraulic cylinder?
HS code of hydraulic cylinder; 8412210000 8412210000 Linear hydraulic power unit (hydraulic cylinder) 0.12000 0.35000 0.00000 0.17000 0.00000