This article mainly introduces:

Bahrain hydraulic cylinder,pushing cylinder manufacturer,pushing cylinder

(Bahrain pushing cylinder,produced by Hengyu Hydraulic Co., Ltd）

pushing cylinder are widely used in Bahrain，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed pushing cylinder for customers from Bahrain.

Introduction to pushing cylinder:

Repair method of small range wear of oil pushing cylinder: 1. Use oxygen-acetylene flame to bake the scratched part (master the temperature, avoid surface annealing), bake the oil on the metal surface all the year round until no sparks splash; 2. The scratched part is treated with an Angle grinder, the grinding depth is more than 1 mm, and the groove is polished along the guide rail, preferably a dovetail groove. Scratch both ends of the drilling deeper, change the force situation; 3. Clean the surface with absorbent cotton dipped in acetone or anhydrous ethanol.

The body of the pushing cylinder on the processing process requirements: the body of the pushing cylinder is an important and essential part of the pushing cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the pushing cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

The pushing cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure pushing cylinder can use 20 steel pipe, and the high pressure pushing cylinder can use 45 steel pipe.

The difference between the integral pushing cylinder and the split pushing cylinder: The integral pushing cylinder and the split pushing cylinder in the pushing cylinder are two different pushing cylinders, and they are very different. The whole pushing cylinder, which is cast in one body, is not prone to problems such as oil leakage; The split pushing cylinder is welded twice, so if it is not handled well at the welding, it is prone to problems such as oil leakage and pushing cylinder damage. Therefore, it is obvious that the answer to this question is for difference.

Answers to some questions about pushing cylinder:

What is the material of the lift cylinder?
The cylinder is composed of many parts. The cylinder also contains the seal and the installation port at both ends, the material of these two parts is not easy to determine if there is no physical object. The cylinder body is generally 20 steel, 45 steel, 27SiMn and other materials, and the piston rod is generally 40Cr, 45 steel and other materials.

Injection molding machine die thimble on the side of the feed nozzle, the oil cylinder pull the thimble shift, how to debug the oil cylinder?
The cylinder is connected with the neutron of the injection molding machine, the neutron is retreated after the opening mold is in place, the cylinder taps the thimble plate to the top, and then takes, and the neutron is reset.