This article mainly introduces:

Austria hydraulic cylinder,yg series hydraulic cylinder manufacturer,yg series hydraulic cylinder

(Austria yg series hydraulic cylinder,produced by Hengyu Hydraulic Cylinder Factory）

yg series hydraulic cylinder are widely used in Austria，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed yg series hydraulic cylinder for customers from Austria.

Introduction to yg series hydraulic cylinder:

Factors that should be considered when selecting the oil seal in the yg series hydraulic cylinder: some specific factors should be taken into account when selecting the oil seal in the yg series hydraulic cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: yg series hydraulic cylinder diameter, piston rod diameter, piston rod and piston groove size, yg series hydraulic cylinder working pressure, yg series hydraulic cylinder movement speed, hydraulic system oil temperature and yg series hydraulic cylinder working environment.

We can not just consider the price and ignore the quality when we purchase the yg series hydraulic cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the yg series hydraulic cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the yg series hydraulic cylinder is not required.

The yg series hydraulic cylinder is mainly composed of body, piston, piston rod, yg series hydraulic cylinder head, yg series hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the yg series hydraulic cylinder into two chambers, and moves reciprocally in the yg series hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the yg series hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the yg series hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the yg series hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the yg series hydraulic cylinder bottom and the yg series hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the yg series hydraulic cylinder The working medium of the yg series hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; yg series hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the yg series hydraulic cylinder: The buffer structure of the yg series hydraulic cylinder is to prevent the piston from colliding with the yg series hydraulic cylinder head at the end of the stroke.

yg series hydraulic cylinder installation precautions: Before installing the yg series hydraulic cylinder into the system, the parameters on the yg series hydraulic cylinder label should be compared with the parameters when ordering. The base of the yg series hydraulic cylinder must have sufficient stiffness, otherwise the yg series hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

Answers to some questions about yg series hydraulic cylinder:

How does the cylinder of the shearing machine work?
Plate shear is a machine that cuts a sheet with a reciprocating straight motion from one blade to another. Through the moving upper blade and the fixed lower blade, the shear force is applied to the metal sheet of various thicknesses with a reasonable blade gap, so that the sheet is broken and separated according to the required size. Shearing machine belongs to one of the forging machinery, the main role is the metal processing industry. Products are widely used in aviation, light industry, metallurgy, chemical industry, construction, shipbuilding, automobile, electric power, electrical appliances, decoration and other industries to provide the required special machinery and complete sets of equipment. Working principle: The hydraulic system is used to drive the hydraulic cylinder to output a strong shear force to complete the shearing work.

What is the difference between single acting hydraulic cylinder and double acting hydraulic cylinder?
Single action hydraulic cylinder is a single direction force work, the return of the plunger depends on itself or the weight of the mechanism to return. The double acting hydraulic cylinder is mainly different from the extension and retraction of the piston (the thrust and tension of the saying), which are all operated by the action of liquid pressure.