This article mainly introduces:

Uganda hydraulic cylinder,400 tons hydrauli ccylinder manufacturer,400 tons hydrauli ccylinder

(Uganda 400 tons hydrauli ccylinder,produced by Hengyu Hydraulic Cylinder Factory）

400 tons hydrauli ccylinder are widely used in Uganda，because of long service life，powerful torque，excellent fatigue and impact resistance.So our company has designed 400 tons hydrauli ccylinder for customers from Uganda.

Introduction to 400 tons hydrauli ccylinder:

When the 400 tons hydrauli ccylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the 400 tons hydrauli ccylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

There are some honeycomb holes in the inner wall of the 400 tons hydrauli ccylinder, piston or piston rod surface. How is this formed? When we repair the 400 tons hydrauli ccylinder, we can see that there are some honeycomb holes on the inner wall of the 400 tons hydrauli ccylinder, the piston or the piston rod surface, which are caused by cavitation. Therefore, the cavitation of the 400 tons hydrauli ccylinder is targeted to prevent. Is very necessary.

Before purchasing the 400 tons hydrauli ccylinder, it is necessary to master the original information and design basis, mainly including: the use and working conditions of the machine; The structural characteristics, load conditions, stroke size and operation requirements of the working mechanism; The selected working pressure and flow of the hydraulic system; The reality of materials, fittings and processes; Relevant national standards and technical specifications, etc.

When the 400 tons hydrauli ccylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the 400 tons hydrauli ccylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about 400 tons hydrauli ccylinder:

What is a constant velocity cylinder? What is the difference between hydraulic cylinder and constant velocity cylinder?
The constant speed cylinder should be the same as the speed of the piston rod extension and withdrawal cylinder is called the constant speed cylinder. The difference between it and the ordinary hydraulic cylinder is that the ordinary hydraulic cylinder only has a piston rod extended out, and the general extension speed is slow and the recovery speed is fast, because of the relationship between the effective area. Effective area of piston chamber > Effective area of piston rod chamber. The effective area on both sides of the constant speed cylinder is the same, because there are piston rods sticking out at both ends. The application of constant speed cylinder is most common in grinding machines.

To achieve the same stroke, which is better, hydraulic cylinder or lead screw?
If there is batch action, then the hydraulic pressure is better. Hydraulic: smooth operation, no lubrication, easy control, high control accuracy (can use proportional or servo system), the key is to manually control, but certainly to support the hydraulic system, for a single action must cost. Maintenance costs are also high. Lead screw: simple structure, easy to achieve, convenient maintenance, but must be lubricated, can not be manual, or manual control is inconvenient. See where it is used, if it is used in high-precision occasions, it must only be hydraulic, because the lead screw has a gap. There are many hydraulic actions, the hydraulic system itself must be prepared, then the use of hydraulic pressure is also very economical.