This article mainly introduces:

Latvia hydraulic cylinder,hydraulic jig cylinder manufacturer,hydraulic jig cylinder

(Latvia hydraulic jig cylinder,produced by Hebei Hengyu company）

hydraulic jig cylinder are widely used in Latvia，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed hydraulic jig cylinder for customers from Latvia.

Introduction to hydraulic jig cylinder:

The coordination of the sliding parts of the hydraulic jig cylinder itself should not be too tight, the sealing friction force should not be too large, and H8 / f8 coordination should be selected between the piston rod and the guide sleeve; Check whether the size of the sealing ring is processed strictly according to the standard; If the V-shaped sealing ring is used, the sealing friction should be adjusted to a moderate degree.

When the long-stroke hydraulic jig cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in hydraulic jig cylinder head seal damage, oil leakage, and piston sleep in the hydraulic jig cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the hydraulic jig cylinder; The piston and the piston rod are connected with a spherical joint.

hydraulic jig cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the hydraulic jig cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

The daily inspection of the hydraulic jig cylinder includes: checking the connection of the hydraulic jig cylinder and the pipe joint for leaks. Check the hydraulic jig cylinder rod for leaks. Check the hydraulic jig cylinder connection for leaks. When the hydraulic jig cylinder moves, the work is normal and smooth. Whether the hydraulic jig cylinder has internal leakage.

Answers to some questions about hydraulic jig cylinder:

How to set the stroke of the cylinder?
Self-design should be based on product demand and practical application. The stroke of standard cylinder depends on the parameters the customer requires. The hydraulic cylinder is a linear motion actuator whose output force is proportional to the effective area of the piston and the pressure difference on both sides. Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow rate and pressure of the fluid, and the output is the speed and force of the linear motion. The piston of the hydraulic cylinder can complete the linear reciprocating movement, and the linear displacement of the output is limited. Hydraulic cylinder is an energy conversion device that converts hydraulic energy into mechanical energy of reciprocating linear motion. The hydraulic cylinder is basically composed of cylinder body, cylinder head, piston and piston rod, sealing device, buffer device and exhaust device.

How to calculate the tonnage of hydraulic cylinder? The tonnage of the cylinder refers to the output force of the cylinder under rated working pressure: 1, for single rod piston hydraulic cylinder, it can be calculated by the area of the circle corresponding to the inner diameter of the cylinder A (square centimeter), and the rated working pressure of the system p (mpa), the value is equal to 10pA kg force, and the ton is 0.01pA. 2, for the double rod piston hydraulic cylinder, with A(square centimeter) to indicate the cylinder cylinder diameter and piston rod outer diameter defined by the ring area, with p (mpa) to indicate the rated working pressure of the system, the output force of the cylinder is 0.01pA ton force.