This article mainly introduces:

The Philippines hydraulic cylinder,hydraulic booster cylinder manufacturer,hydraulic booster cylinder

(The Philippines hydraulic booster cylinder,produced by Hebei Hengyu company）

hydraulic booster cylinder are widely used in The Philippines，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed hydraulic booster cylinder for customers from The Philippines.

Introduction to hydraulic booster cylinder:

The hydraulic booster cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

The body of the hydraulic booster cylinder on the processing process requirements: the body of the hydraulic booster cylinder is an important and essential part of the hydraulic booster cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the hydraulic booster cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

hydraulic booster cylinder piston rod material selection and requirements: ① piston rod is usually made of 45 steel. When there is a large impact force and heavy load transmission, it is made of 40Cr steel. This is to ensure that the piston rod has sufficient working strength. The piston rod is generally designed as a hydraulic booster cylinder, if the diameter is larger, the hollow piston rod can be used. Made of No. 45 seamless steel pipe. ③ When the piston rod is manufactured, the blank should be first forged and conditioned after mechanical rough processing, and the hardness of HB=230 ~ 250. The purpose of conditioning is to improve the machining performance and increase the working strength of the material. ④ The surface roughness Ra of the piston rod after finishing should not be greater than 0.65μm. ⑤ In order to improve the corrosion resistance of the piston rod, the working surface of the rod can be plated with hard chromium. ⑥ The piston rod and the end cap are guided by H8 ' hydraulic booster cylinder piston rod industry standard: piston rod diameter series of national recommended standard GB/T2348-1993. Piston rod thread size series standard GB/T2350-1980. Please refer to execute. There is no industry standard for piston rods Both the hydraulic booster cylinder and the hydraulic motor are devices that convert the pressure energy of the liquid into mechanical energy and output it. The hydraulic booster cylinder mainly outputs linear motion and force. The hydraulic booster cylinder has a variety of forms, according to the different characteristics of its mechanism it can be divided into piston type, plunger type and swing type three categories, according to the mode of action he can be divided into single action and double action. Piston hydraulic booster cylinder, plunger hydraulic booster cylinder is mainly used for: machinery, such as excavators; Scientific research, such as university structure laboratory. The plunger hydraulic booster cylinder is used for pressure testing machines, such as Jinan test, and the test machine is used for material testing.

When installing the piston rod, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the hydraulic booster cylinder head adn the earring (or the middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent the phenomenon of rigid interference and causing unnecessary damage.

Answers to some questions about hydraulic booster cylinder:

The cylinder is moving too fast. I want to slow it down. What can I do?
The hydraulic cylinder is the execution action, and the power source is the hydraulic system. The cylinder speed is too fast, indicating that the system flow is large, the hydraulic system has a hydraulic valve responsible for speed control function, method: 1, by adjusting the speed control valve to reduce the speed; 2, the speed control valve has been adjusted to the lowest, indicating that the hydraulic system design flow is too high, the need to re-configure the hydraulic system according to demand, or the cylinder diameter is changed.

How does the variable amplitude cylinder work?
The variable amplitude cylinder is generally an engineering hydraulic cylinder connected by the front and back earrings, and the telescopic expansion of the hydraulic cylinder changes the Angle of the arm of the lifting machinery to achieve the role of the variable amplitude, according to the role it plays is called the variable amplitude cylinder, and there is no variable amplitude hydraulic cylinder in the classification of hydraulic cylinders.