This article mainly introduces:

Poland hydraulic cylinder,tailplate hydraulic cylinder manufacturer,tailplate hydraulic cylinder

(Poland tailplate hydraulic cylinder,produced by Hengyu Group）

tailplate hydraulic cylinder are widely used in Poland，because of clever hydraulic energy conversion，excellent temperature resistance，simple structure and reliable operation.So our company has designed tailplate hydraulic cylinder for customers from Poland.

Introduction to tailplate hydraulic cylinder:

Most of the failure of the tailplate hydraulic cylinder is because there is a foreign body in the tailplate hydraulic cylinder into the failure of the tailplate hydraulic cylinder, the most problematic is that it is difficult to determine when the foreign body is into the tailplate hydraulic cylinder. After a foreign body enters, if the outer side of the sliding surface of the piston is equipped with a seal with a lip edge, then the lip edge of the seal can scrape the foreign body when working, which is beneficial to avoid scratching. However, the piston equipped with 0-shaped sealing ring has a sliding surface at both ends, and foreign bodies are sandwiched between this sliding surface, which is easy to form scars.

The piston seal of the tailplate hydraulic cylinder is the main element to prevent leakage in the tailplate hydraulic cylinder. For the lip seal, it should focus on checking whether the lip edge is bruised and worn, and for the combination seal, it should focus on checking the wear of the sealing surface, and then determine whether the seal can be used. In addition, it is necessary to check whether the static seal between the piston and the piston rod is crushed. The piston rod seal should focus on checking the wear of the seals and supporting rings.

The daily inspection of the tailplate hydraulic cylinder includes: checking the connection of the tailplate hydraulic cylinder and the pipe joint for leaks. Check the tailplate hydraulic cylinder rod for leaks. Check the tailplate hydraulic cylinder connection for leaks. When the tailplate hydraulic cylinder moves, the work is normal and smooth. Whether the tailplate hydraulic cylinder has internal leakage.

The tailplate hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

Answers to some questions about tailplate hydraulic cylinder:

How many kilograms can the 63 cylinder hold?
The force of the cylinder is related to the cylinder diameter and pressure. 63 cylinder diameter (cylinder inner circle diameter), 21MPA pressure, thrust 6 tons.

What is the material of the hydraulic cylinder slider?
Three parts of the hydraulic cylinder are essential, which are: cylinder - cylinder head assembly, piston - piston rod assembly, and sealing device. When you say slider, you mean piston. - Piston rod. Piston materials commonly used gray cast iron, wear-resistant cast iron, aluminum alloy (assembled), etc., can also be used 35 and 45 steel (integral). The piston rod is generally made of 35 and 45 steel. When the impact vibration is large, alloy steel such as 55 steel or 40Cr is used.