This article mainly introduces:

The Philippines hydraulic cylinder,series synchronous cylinder manufacturer,series synchronous cylinder

(The Philippines series synchronous cylinder,produced by Hengyu Hydraulic Co., Ltd）

series synchronous cylinder are widely used in The Philippines，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed series synchronous cylinder for customers from The Philippines.

Introduction to series synchronous cylinder:

When using the series synchronous cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the series synchronous cylinder block. If the series synchronous cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the series synchronous cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the series synchronous cylinder, so that the working efficiency of the series synchronous cylinder is reduced.

The oil series synchronous cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

When the series synchronous cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the series synchronous cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

The advantages and disadvantages of the series synchronous cylinder: the surface of the series synchronous cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the series synchronous cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about series synchronous cylinder:

How to distinguish cylinder rod head and cylinder bottom?
One end of the piston rod can be telescopic is the rod head, and the one behind is the bottom of the cylinder, which is the single rod cylinder.

How to choose cylinder size, pump type, motor power for a 30-ton press?
30 tons = 30,000 kg. It is expected to use a 16 mpa oil pump, then the cylinder area =30000/(160x3.14) and then square, the cylinder bore is 150 mm. Calculated at 500 mm travel per minute, the flow rate per minute is :0.75^2x3.14x5=8.8 liters/minute. Motor power =8.8x16/60=2.355. A 9 L/min, 16 mpa pump is available. Piston diameter 150 mm cylinder. 3 kW motor.