This article mainly introduces:

Poland hydraulic cylinder,single rack cylinder manufacturer,single rack cylinder

(Poland single rack cylinder,produced by Hengyu Hydraulic Cylinder Factory）

single rack cylinder are widely used in Poland，because of long service life，smooth movement，high work efficiency.So our company has designed single rack cylinder for customers from Poland.

Introduction to single rack cylinder:

Protection of the single rack cylinder surface: During the dismantling process, safety protection should be carried out on the single rack cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the single rack cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the single rack cylinder should be cleaned up in time.

The single rack cylinder should be used correctly and maintained regularly. The single rack cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the single rack cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

The definition of the minimum stable speed refers to the minimum movement speed of the single rack cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the single rack cylinder that undertakes different work has different requirements for the minimum stable speed.

Because of the slightly complex structure of the buffer single rack cylinder, sometimes there will be problems, such as when the single rack cylinder with the buffer device is started in reverse, the piston often stops temporarily or reverses. Elimination method: The orifice of the check valve is too small, so that the amount of oil entering the buffer chamber is too small, and even a vacuum occurs, so the above fault phenomenon will occur when the buffer plunger leaves the end cover. In this regard, the orifice of the check valve should be increased.

Answers to some questions about single rack cylinder:

What is the cause of sound and vibration when the hydraulic cylinder is under load?
The main reason 1) may be that the load machinery has stuck phenomenon, and the resistance is large. 2) The hydraulic oil is not enough, or the filter is blocked by dirty things, and the oil is flooded. 3) There is a problem with the pump.

How does the cylinder of the shearing machine work?
Plate shear is a machine that cuts a sheet with a reciprocating straight motion from one blade to another. Through the moving upper blade and the fixed lower blade, the shear force is applied to the metal sheet of various thicknesses with a reasonable blade gap, so that the sheet is broken and separated according to the required size. Shearing machine belongs to one of the forging machinery, the main role is the metal processing industry. Products are widely used in aviation, light industry, metallurgy, chemical industry, construction, shipbuilding, automobile, electric power, electrical appliances, decoration and other industries to provide the required special machinery and complete sets of equipment. Working principle: The hydraulic system is used to drive the hydraulic cylinder to output a strong shear force to complete the shearing work.