This article mainly introduces:

Belarus hydraulic cylinder,land leveller hydraulic cylinder manufacturer,land leveller hydraulic cylinder

(Belarus land leveller hydraulic cylinder,produced by Hebei Hengyu company）

land leveller hydraulic cylinder are widely used in Belarus，because of powerful torque，smooth movement，high work efficiency.So our company has designed land leveller hydraulic cylinder for customers from Belarus.

Introduction to land leveller hydraulic cylinder:

land leveller hydraulic cylinder head explanation: low pressure castings, medium and low pressure with HT300 gray iron, medium and high pressure with 35, 45 steel. When the land leveller hydraulic cylinder head itself is the guide sleeve of the piston rod, the land leveller hydraulic cylinder head is best cast iron. At the same time, brass, bronze or other wear-resistant materials should be fused on the guide surface. If the guide sleeve is pressed into the land leveller hydraulic cylinder head, the guide sleeve shall be wear-resistant cast iron, bronze or brass.

When the control pressure of the hydraulic system is too low, the land leveller hydraulic cylinder will appear wrong or no action, because the throttle resistance in the control pipeline may be too large, the flow valve is improperly adjusted, the control pressure is inappropriate, and the pressure source is interfered with. At this time, check the control pressure source to ensure that the pressure is adjusted to the specified value of the system.

When the land leveller hydraulic cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the land leveller hydraulic cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil land leveller hydraulic cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical land leveller hydraulic cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the land leveller hydraulic cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

The main role of the land leveller hydraulic cylinder: the land leveller hydraulic cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the land leveller hydraulic cylinder realizes reciprocating motion. The structure of the land leveller hydraulic cylinder has three categories: piston land leveller hydraulic cylinder, plunger land leveller hydraulic cylinder, swing land leveller hydraulic cylinder, piston land leveller hydraulic cylinder and plunger land leveller hydraulic cylinder to achieve reciprocating linear motion, output speed and thrust, swing land leveller hydraulic cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the land leveller hydraulic cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The land leveller hydraulic cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about land leveller hydraulic cylinder:

Can multiple identical hydraulic cylinders be supplied with the same supply line?
This can be connected, but there is a disadvantage, that is, the hydraulic cylinder with the minimum pressure is extended first, and then the pressure is higher, and then the higher, until all the hydraulic cylinders are extended, which may not meet the requirements of field use.

Where is the tension cylinder used in the excavator?
Get off the inside of the frame, behind the guide wheel (steering wheel, guide wheel). Disassemble the track and take the guide wheel out to see the tensioning cylinder (track spring).